Exactly how to Troubleshoot and Fix an Electric Hot Water Heater

Course Detail

How do you feel about How to Troubleshoot and Repair an Electric Water Heater?


What Would Cause My Electric Water Heater to Stop Working?
Lots of modern-day homes use an electric hot water heater for their furnace, because of its ease and simplicity of use. Nonetheless, just like any other electric devices, problems might arise with its usage, all of a sudden. It can be really aggravating to awaken to a cold shower rather than a warm one or having your bathroom with water that isn't hot sufficient or perhaps too hot. Whatever the situation might be, water heater issues can be quite stressful. The good news is, we've made a listing of feasible remedies to your water heater issues. There are a variety of variables that can cause a number of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of need to not pose too much of a problem if you comply with these actions:

Call A Specialist:


If after changing all damaged parts and resetting your temperature, the water heater still isn't working, you may require to call a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have been changed or it may be undersized for the amount of hot water required in your house. Whatever the instance might be, an expert plumber would help solve the trouble.

Inspect Your Power Supply:


As fundamental as this may seem, it is very required. Without adequate power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power trouble. Examine if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, just turn it on and off once more. Change any broken or damaged fuse. Check the home appliance with power after these adjustments to see if it's now working.

Check Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature level settings on your upper thermostat. Ensure the breaker is turned off before doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This should aid heat up the water. Turn the circuit breaker back on and also inspect if the issue has been settled.

Examine the Heating Element in the Water Heater:


If it's not a power trouble, after that try checking out your burner if it is still functioning. Evaluate each of your heating elements to ensure the issue isn't with any of them. If any one of them is malfunctioning, replace that component and after that check whether the warm water is back on.

Final thought


Water heater troubles are not constantly major. Most of them are because of minor concerns like a blown fuse or worn-out heating element. Changing the defective components must do the trick. Nonetheless, if you are still not able to solve the issue, give a call to your closest plumber ahead to get it repaired.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    Hot Water Heater Repair

    As a keen reader about Hot Water Heater Repair, I think sharing that piece of content was sensible. I beg you take the opportunity to share this blog entry if you liked it. We cherish reading our article about Hot Water Heater Repair.




    Call

    Leave a Reply

    Your email address will not be published. Required fields are marked *